Prototyping and Test Technician Job
If this is a scam...
Mark as SPAM
Thank you for helping!...
Undo
Employer: Lumivera Technologies Inc.
SpiderID: 14239315
Location: Richmond, British Columbia
Posted: 9/14/2026
Wage: $35.90 per hour, 37.5 hours per week
Priority Review Date: 12/13/2026
Job Code / NOC / SOC: 22310
Category: Engineering
Job Description:
ABOUT LUMIVERA TECHNOLOGIES INC.
Lumivera Technologies Inc. is a Richmond, British Columbia lighting design and engineering company. We design, certify and assemble thermally engineered LED fixtures for warehouse and distribution-centre operators, refrigerated grocery retailers and institutional facility operators across British Columbia and Western Canada. Our fixtures are built for the buildings where ordinary commercial lighting fails early: high ceilings, long operating hours, high ambient heat, and refrigerated and freezer space. Product design, thermal and optical engineering, certification management, quality control and final assembly all happen here in Richmond.
POSITION: Prototyping and Test Technician
NOC 2021: 22310 - Electrical and electronics engineering technologists and technicians
Positions available: 1
Work location: #460-3820 Cessna Drive, Richmond, British Columbia. On site. Not a remote position.
TERMS OF EMPLOYMENT
Employment type: Permanent, full-time
Hours: 37.5 hours per week
Wage: $35.90 per hour
Wage progression: Reviewed annually
Overtime: Paid in accordance with the BC Employment Standards Act
Bonus: None
Benefits: None
Vacation and statutory holidays: As provided under the BC Employment Standards Act
Language of work: English
Start date: As soon as possible
DUTIES
- Build and rework prototype LED fixtures from engineering drawings, including LED board mounting, thermal interface application, driver installation and wiring.
- Set up and operate bench instrumentation for the validation programme, covering thermal, electrical and photometric measurement.
- Run thermal testing on the fixture platforms, including elevated-ambient and cold-cycling conditions, and record results against the design targets.
- Instrument and verify the two integral temperature sensors fitted to every unit, and the two thermally independent cooling circuits.
- Carry out electrical safety and surge-protection checks in support of cUL/CSA submissions to UL 1598, FCC Part 15B testing and DesignLights Consortium listing.
- Prepare written test reports and maintain the validation records that the certification submissions draw on.
- Perform inbound inspection of components arriving from the company's manufacturing partners, against specification.
- Complete the per-unit commissioning record for production fixtures from month 4, including end-of-line electrical and optical test.
- Calibrate and maintain test equipment, and keep test procedures documented in writing.
REQUIREMENTS
Education: A two-year diploma in electronics engineering technology, electromechanical engineering technology, or a related technical programme. Graduates of BCIT, Kwantlen Polytechnic University and comparable programmes are encouraged to apply.
Experience: Two or more years in a prototyping, test, laboratory or electronics production environment. New graduates with strong hands-on laboratory and instrumentation coursework will be considered.
Skills:
- Hands-on electronic assembly, including soldering, wiring and mechanical fastening to a torque specification
- Use of bench test instrumentation, such as multimeters, power analysers, thermocouples and data loggers
- Ability to follow and to write test procedures, and to record measurements accurately
- Reading engineering drawings, wiring diagrams and specifications
- Familiarity with LED drivers, low-voltage DC circuits or thermal measurement is an asset
- Careful, methodical work habits and clear written reporting in English
Language: English
HOW TO APPLY
Please send your resume to [email protected].
Email: [email protected]
Phone: 778-801-6733
Mailing address: #460-3820 Cessna Drive, Richmond, British Columbia
We thank all applicants for their interest. Only those selected for an interview will be contacted.
We welcome applications from all qualified candidates, including Indigenous peoples, newcomers to Canada, youth, persons with disabilities, and asylum claimants holding a valid work permit.
Lumivera Technologies Inc. is a Richmond, British Columbia lighting design and engineering company. We design, certify and assemble thermally engineered LED fixtures for warehouse and distribution-centre operators, refrigerated grocery retailers and institutional facility operators across British Columbia and Western Canada. Our fixtures are built for the buildings where ordinary commercial lighting fails early: high ceilings, long operating hours, high ambient heat, and refrigerated and freezer space. Product design, thermal and optical engineering, certification management, quality control and final assembly all happen here in Richmond.
POSITION: Prototyping and Test Technician
NOC 2021: 22310 - Electrical and electronics engineering technologists and technicians
Positions available: 1
Work location: #460-3820 Cessna Drive, Richmond, British Columbia. On site. Not a remote position.
TERMS OF EMPLOYMENT
Employment type: Permanent, full-time
Hours: 37.5 hours per week
Wage: $35.90 per hour
Wage progression: Reviewed annually
Overtime: Paid in accordance with the BC Employment Standards Act
Bonus: None
Benefits: None
Vacation and statutory holidays: As provided under the BC Employment Standards Act
Language of work: English
Start date: As soon as possible
DUTIES
- Build and rework prototype LED fixtures from engineering drawings, including LED board mounting, thermal interface application, driver installation and wiring.
- Set up and operate bench instrumentation for the validation programme, covering thermal, electrical and photometric measurement.
- Run thermal testing on the fixture platforms, including elevated-ambient and cold-cycling conditions, and record results against the design targets.
- Instrument and verify the two integral temperature sensors fitted to every unit, and the two thermally independent cooling circuits.
- Carry out electrical safety and surge-protection checks in support of cUL/CSA submissions to UL 1598, FCC Part 15B testing and DesignLights Consortium listing.
- Prepare written test reports and maintain the validation records that the certification submissions draw on.
- Perform inbound inspection of components arriving from the company's manufacturing partners, against specification.
- Complete the per-unit commissioning record for production fixtures from month 4, including end-of-line electrical and optical test.
- Calibrate and maintain test equipment, and keep test procedures documented in writing.
REQUIREMENTS
Education: A two-year diploma in electronics engineering technology, electromechanical engineering technology, or a related technical programme. Graduates of BCIT, Kwantlen Polytechnic University and comparable programmes are encouraged to apply.
Experience: Two or more years in a prototyping, test, laboratory or electronics production environment. New graduates with strong hands-on laboratory and instrumentation coursework will be considered.
Skills:
- Hands-on electronic assembly, including soldering, wiring and mechanical fastening to a torque specification
- Use of bench test instrumentation, such as multimeters, power analysers, thermocouples and data loggers
- Ability to follow and to write test procedures, and to record measurements accurately
- Reading engineering drawings, wiring diagrams and specifications
- Familiarity with LED drivers, low-voltage DC circuits or thermal measurement is an asset
- Careful, methodical work habits and clear written reporting in English
Language: English
HOW TO APPLY
Please send your resume to [email protected].
Email: [email protected]
Phone: 778-801-6733
Mailing address: #460-3820 Cessna Drive, Richmond, British Columbia
We thank all applicants for their interest. Only those selected for an interview will be contacted.
We welcome applications from all qualified candidates, including Indigenous peoples, newcomers to Canada, youth, persons with disabilities, and asylum claimants holding a valid work permit.
Job Requirements:
Education: A two-year diploma in electronics engineering technology, electromechanical engineering technology, or a related technical programme. Graduates of BCIT, Kwantlen Polytechnic University and comparable programmes are encouraged to apply.
Experience: Two or more years in a prototyping, test, laboratory or electronics production environment. New graduates with strong hands-on laboratory and instrumentation coursework will be considered.
Skills:
- Hands-on electronic assembly, including soldering, wiring and mechanical fastening to a torque specification
- Use of bench test instrumentation, such as multimeters, power analysers, thermocouples and data loggers
- Ability to follow and to write test procedures, and to record measurements accurately
- Reading engineering drawings, wiring diagrams and specifications
- Familiarity with LED drivers, low-voltage DC circuits or thermal measurement is an asset
- Careful, methodical work habits and clear written reporting in English
Language: English
Experience: Two or more years in a prototyping, test, laboratory or electronics production environment. New graduates with strong hands-on laboratory and instrumentation coursework will be considered.
Skills:
- Hands-on electronic assembly, including soldering, wiring and mechanical fastening to a torque specification
- Use of bench test instrumentation, such as multimeters, power analysers, thermocouples and data loggers
- Ability to follow and to write test procedures, and to record measurements accurately
- Reading engineering drawings, wiring diagrams and specifications
- Familiarity with LED drivers, low-voltage DC circuits or thermal measurement is an asset
- Careful, methodical work habits and clear written reporting in English
Language: English
Job Criteria:
Start Date: As soon as possible
Position Type: Full-Time Permanent
Experience:
Education:
Travel:
Vacation:
Company Profile:
Lumivera Technologies Inc. is a Richmond, British Columbia lighting design and engineering company specializing in energy-efficient LED lighting systems for architectural and commercial applications. We design, prototype, and refine our own lighting products from concept to manufacturing.
Contact Information:
| Contact Name: Lumivera Technologies Inc. | Type: |
| Company: Lumivera Technologies Inc. | |
| Web Site: lumiveratech.ca | |