Plastic-film extrusion machine operator Job

Company: Les Industries Polykar Inc. O/A Polykar

Business information: Polykar is a company that offers sustainable flexible packaging solutions in North America. Everything we make is either 100% recyclable or compostable. Our product portfolio features polyethylene film, recycled garbage bags, certified compostable packaging, food-approved bags and industrial-strength packaging. We produce plastic rolls for the food packaging industry ensuring compliance with BRCGS Food Safety Standards.

Business address: 5637 Rue Kieran, Saint-Laurent, QC H4S 0A3

Work Location: 9406 130 Street SW, Edmonton, AB T6Y 0N3

Type of Employment: Full time - Permanent

Estimated Start Date: As soon as possible

Job Description:

Troubleshoot and make minor adjustments to equipment

Weigh resins, colorants and other chemicals according to formulae

Monitor and inspect quality of material produced

Place weighed materials in mixing machines

Unload mixture into container or conveyor for further processing

Set up and operate calender machines to transform plastic bales or slabs into continuous sheets or films of specified thickness

Set up and operate extruding machines to extrude plastic compound through a nozzle or die

Change dies on extruding machines according to production line change

Prepare and change moulds and adjust equipment for production line change

Safe operation of a three-layer/and or mono-layer blown film extrusion system

Make extruder adjustments according to already established working methods to maximize productivity

Make order changes

Ensure the quality of the finished product while following all health and safety rules

Perform continuous quality checks throughout production runs

Follow a 'clean as you go' policy keeping all areas tidy on site to ensure compliance with BRCGS food safety standards

Monitor machine performance, maintain output, quality and waste targets whilst keeping downtime to a minimum

Report to the Plant Manager if a machine is defective or if there is malfunction

Operate adequately Windmoller & Holscher and Reifenhauser equipment to complete job duties

Conduct routine maintenance and calibration on Windmoller & Holscher and Reifenhauser equipment

Technical troubleshooting of multi-layer blown film lines to identify and correct film defects such as gage variation, bubble instability, insufficient layer bonding, gels, mel fracture, die lines and material contamination

Monitor and record key process parameters and quality considerations during production such as thickness, width, haze, tensile strength and opacity

Monitor machine performance to maintain production output and quality standards to control waste produced and minimize downtime

Follow BRCGS food safety standards, GMP requirements and clean as you go practices at all times to remain compliant with our BRCGS food safety certification

Provide technical guidance and on the job training to junior or less experienced operators when required to maintain consistent production output and product quality

Requirements:

Education: Completion of secondary school is required.

Diploma in plastics technology is an asset.

Experience: At least 4 years of experience in the blown extrusion industry or co-extrusion is required.

Knowledge of BRCGS and ISO standards is an asset.

Experience with Windmoller & Holscher and Reifenhauser equipment is required.

Working Conditions and Physical Capabilities: Attention to detail, Manual dexterity, Handling heavy loads, Hand-eye co-ordination, Fast-paced environment, Combination of sitting, standing, walking, Physically demanding, Standing for extended periods, Work under pressure, Tight deadlines.

Personal suitability: Organized, Efficient interpersonal skills, Team player, Strong oral and written communication skills, Initiative, Accurate, Judgement, Ability to multitask and work autonomously

Weight handling: Up to 23 kg (50 lbs).

Language: English is required.

Salary: $29.00 – 36.00 hourly, 36 – 48 Hours per week.

Benefits: Transportation costs covered if worker needs to relocate. Life insurance and vision care are provided. Disability, dental, and extended medical insurance as well as PPE are provided.

Important Information: Flexibility in schedule is required. Rotating continental 12-hour shifts from 7:00 AM to 7:00 PM OR from 7:00 PM to 7:00 AM. The worker will work an average of 42 hours per week within a 2 week period as per averaging agreement. Working days and days off will be determined on a rotational basis, with a minimum of 2 and a maximum of 5 shifts per week. Work on weekends is required. Overtime may be required depending on the business needs.

Apply by e-mail to: [email protected]

cc: [email protected]

**Please apply with the subject: Job Application – 3 Plastic-film extrusion machine operator – Edmonton**

Polykar is a company that offers sustainable flexible packaging solutions in North America. Everything we make is either 100% recyclable or compostable. Our product portfolio features polyethylene film, recycled garbage bags, certified compostable packaging, food-approved bags and industrial-strength packaging. We produce plastic rolls for the food packaging industry ensuring compliance with BRCGS Food Safety Standards.