Lead Engineer Job
If this is a scam...
Mark as SPAM
Thank you for helping!...
Undo
Employer: Quest Global Services-N.A., Inc
SpiderID: 14143309
Location: Windsor, Connecticut
Posted: 2/18/2026
Wage:
Priority Review Date: 5/19/2026
Job Code / NOC / SOC: 28290.0266
Category: Engineering
Job Description:
Company: Quest Global Services-N.A., Inc.
Position Title: Lead Engineer
Location: 175 Addison Rd, Entrance A, Windsor, CT 06095 and unanticipated client locations throughout the U.S.
Position Responsibilities: Design vibration monitoring and protection systems for heavy duty gas turbines, Steam Turbines and heavy industrial rotatory machines. Procure review and validation for vibration monitoring and protection equipment. Test and qualify equipment for machine monitoring equipment’s for industrial grade heavy equipment. Design, implement, and commission control loops as per site requirements for control new unit jobs as well as software upgrades. Leverage ToolboxST, CIMPLICITY for Gas Turbine, Steam Turbine, Generator and Compressor code control software coding, simulation, and approvals as per standards and contractual requirements. Review of control philosophy, P&I diagram, instruments list, flow chart. Review and report all device discrepancies between P&IDs, signal lists and other relevant inputs before software implementation. Perform controls software modifications for Power Generation Gas Turbine, Steam Turbine, Generator and Compressor.
Position Requirements: Bachelor’s degree (or foreign equivalent) in Electronics Engineering, or related field, PLUS five (5) years of experience in the job offered or a related position. Experience must include demonstrable knowledge of: Requirements Engineering & Traceability; Advanced Control Algorithms incl. override controls for GT/ST/HRSG/BOP systems; HMI/SCADA Engineering incl. navigation logic in GE Cimplicity, Ovation Studio, & custom object libraries; P&ID-Driven Control Logic Development; PLC/DCS Programming; ST programming on GE Mark Vie (ToolboxST); Ovation DCS; Allen-Bradley ControlLogix platforms; Configuration of RTDs, thermocouples, differential/ultrasonic flowmeters, vibration probes, load cells, actuators, MOVs, & motor starters w analog/digital I/O mapping; wiring per IEC 60204 / IEEE 602 standards; FAT/SAT verification; System Validation & Simulation; validation per API 670 / IEC 61508 SIL; Modbus RTU/TCP; Profibus DP/PA; OPC DA/UA configuration, & network diagnostics for distributed control architectures. Travel to unanticipated client locations, throughout the U.S., approximately 30% as required. Any suitable combination of education, training, or experience is acceptable.
To apply, please email resume to [email protected]. Reference job code 28290.0266.
Position Title: Lead Engineer
Location: 175 Addison Rd, Entrance A, Windsor, CT 06095 and unanticipated client locations throughout the U.S.
Position Responsibilities: Design vibration monitoring and protection systems for heavy duty gas turbines, Steam Turbines and heavy industrial rotatory machines. Procure review and validation for vibration monitoring and protection equipment. Test and qualify equipment for machine monitoring equipment’s for industrial grade heavy equipment. Design, implement, and commission control loops as per site requirements for control new unit jobs as well as software upgrades. Leverage ToolboxST, CIMPLICITY for Gas Turbine, Steam Turbine, Generator and Compressor code control software coding, simulation, and approvals as per standards and contractual requirements. Review of control philosophy, P&I diagram, instruments list, flow chart. Review and report all device discrepancies between P&IDs, signal lists and other relevant inputs before software implementation. Perform controls software modifications for Power Generation Gas Turbine, Steam Turbine, Generator and Compressor.
Position Requirements: Bachelor’s degree (or foreign equivalent) in Electronics Engineering, or related field, PLUS five (5) years of experience in the job offered or a related position. Experience must include demonstrable knowledge of: Requirements Engineering & Traceability; Advanced Control Algorithms incl. override controls for GT/ST/HRSG/BOP systems; HMI/SCADA Engineering incl. navigation logic in GE Cimplicity, Ovation Studio, & custom object libraries; P&ID-Driven Control Logic Development; PLC/DCS Programming; ST programming on GE Mark Vie (ToolboxST); Ovation DCS; Allen-Bradley ControlLogix platforms; Configuration of RTDs, thermocouples, differential/ultrasonic flowmeters, vibration probes, load cells, actuators, MOVs, & motor starters w analog/digital I/O mapping; wiring per IEC 60204 / IEEE 602 standards; FAT/SAT verification; System Validation & Simulation; validation per API 670 / IEC 61508 SIL; Modbus RTU/TCP; Profibus DP/PA; OPC DA/UA configuration, & network diagnostics for distributed control architectures. Travel to unanticipated client locations, throughout the U.S., approximately 30% as required. Any suitable combination of education, training, or experience is acceptable.
To apply, please email resume to [email protected]. Reference job code 28290.0266.
Contact Information:
| Contact Name: Quest Global Services-N.A., Inc | Type: Employer |
| Company: |