Industrial Mechanic and Millwright Job
If this is a scam...
Mark as SPAM
Thank you for helping!...
Undo
Employer: Day & Campbell Limited
SpiderID: 14214836
Location: Hamilton, Ontario
Posted: 7/27/2026
Wage: $36.92 hourly
Priority Review Date: 10/25/2026
Job Code / NOC / SOC:
Category: Heavy Equipment
Job Description:
Company: Day & Campbell Limited
Business information: Day & Campbell Limited is a family-owned and operated business founded in 1946. We manufacture Autoclaved and Concrete Slag Block in a wide range of colours and finishes. Our team has very extensive knowledge and experience in various sectors of both the landscape and construction industry; including design, installation, cleaning and maintenance.
Business address: 1074 Upper Wellington Street, Hamilton, ON, L9A 3S6
Work Location: Same as above
Type of Employment: Full time - Permanent
Estimated Start Date: As soon as possible
Job Description:
Coach and instruct apprentices
Detect and troubleshoot irregularities and malfunctions
Construct foundations for machinery
Repair or replace defective machinery parts
Supervise other workers
Fabricate parts required during overhaul, maintenance or set-up
Estimate costs and materials
Perform routine maintenance work on machinery
Read and interpret blueprints, maps, drawings and specifications to determine work procedures
Operate machining tools to fabricate parts required during overhaul, maintenance or set-up of machinery
Program programmable logic controllers (PLCs)
Assembling machinery and equipment (prior to installation)
Install, align, dismantle and move stationary industrial machinery and mechanical equipment, such as pumps, fans, tanks, conveyors, furnaces and generators according to layout plans using hand and power tools
Operate hoisting and lifting devices such as cranes, jacks and tractors to position machinery and parts during the installation
Set-up and repair of machinery Inspect and examine machinery and equipment to detect and investigate irregularities and malfunctions
Install, troubleshoot and maintain power transmission, vacuum, hydraulic and pneumatic systems, and programmable logic controls
Adjust machinery and repair or replace defective parts
Operate machine tools such as lathes and grinders to fabricate parts Clean, lubricate and perform other routine maintenance work on machinery
Construct foundations for machinery or direct other workers to construct foundations
Be able to weld to repair defective parts
Business information: Day & Campbell Limited is a family-owned and operated business founded in 1946. We manufacture Autoclaved and Concrete Slag Block in a wide range of colours and finishes. Our team has very extensive knowledge and experience in various sectors of both the landscape and construction industry; including design, installation, cleaning and maintenance.
Business address: 1074 Upper Wellington Street, Hamilton, ON, L9A 3S6
Work Location: Same as above
Type of Employment: Full time - Permanent
Estimated Start Date: As soon as possible
Job Description:
Coach and instruct apprentices
Detect and troubleshoot irregularities and malfunctions
Construct foundations for machinery
Repair or replace defective machinery parts
Supervise other workers
Fabricate parts required during overhaul, maintenance or set-up
Estimate costs and materials
Perform routine maintenance work on machinery
Read and interpret blueprints, maps, drawings and specifications to determine work procedures
Operate machining tools to fabricate parts required during overhaul, maintenance or set-up of machinery
Program programmable logic controllers (PLCs)
Assembling machinery and equipment (prior to installation)
Install, align, dismantle and move stationary industrial machinery and mechanical equipment, such as pumps, fans, tanks, conveyors, furnaces and generators according to layout plans using hand and power tools
Operate hoisting and lifting devices such as cranes, jacks and tractors to position machinery and parts during the installation
Set-up and repair of machinery Inspect and examine machinery and equipment to detect and investigate irregularities and malfunctions
Install, troubleshoot and maintain power transmission, vacuum, hydraulic and pneumatic systems, and programmable logic controls
Adjust machinery and repair or replace defective parts
Operate machine tools such as lathes and grinders to fabricate parts Clean, lubricate and perform other routine maintenance work on machinery
Construct foundations for machinery or direct other workers to construct foundations
Be able to weld to repair defective parts
Job Requirements:
Requirements:
-Education: A post-secondary certificate, diploma, or equivalent training in a related field is required.
-Experience: Candidates must have a minimum of 3 years of directly related work experience. Relevant industry certifications, licenses, safety tickets, and other job-specific qualifications are considered essential where applicable but do not replace the minimum work experience requirement.
-The ability to weld is required.
-Driver’s license is an asset
-Work Conditions and Physical Capabilities: Fast-paced environment, Repetitive tasks, handling heavy loads, physically demanding, Bending, crouching, kneeling, Walking, Large workloads, Attention to detail
-Work Site Environment: Indoors, Outdoors, Hot, Cold/refrigerated, Wet/damp, Dusty, Noisy
-Personal Suitability: Positive attitude, Energetic, Hardworking, Reliability, Organized, Efficiency, Adaptability, Collaborative, Dependability, Team player, Flexibility, Able to prioritize tasks, Safety focused
-Weight Handling: Up to 45kg (100 lbs.)
-Language: English is required.
Salary: $36.92 hourly, 42.5 - 44 Hours per week
Benefits: Dental and health benefits provided. Uniforms and tools will be provided at no cost.
Important Information: The employee will work Monday through Friday, from 8 am to 5 pm. The schedule includes 30 minutes of unpaid lunch break and 30 minutes of paid healthy breaks. Flexibility on schedule is required. Shifts may vary according to the business’ needs. Occasional overtime will be required.
Apply by e-mail to: [email protected]
Apply by mail to: 1074 Upper Wellington Street, Hamilton, ON, L9A 3S6
-Education: A post-secondary certificate, diploma, or equivalent training in a related field is required.
-Experience: Candidates must have a minimum of 3 years of directly related work experience. Relevant industry certifications, licenses, safety tickets, and other job-specific qualifications are considered essential where applicable but do not replace the minimum work experience requirement.
-The ability to weld is required.
-Driver’s license is an asset
-Work Conditions and Physical Capabilities: Fast-paced environment, Repetitive tasks, handling heavy loads, physically demanding, Bending, crouching, kneeling, Walking, Large workloads, Attention to detail
-Work Site Environment: Indoors, Outdoors, Hot, Cold/refrigerated, Wet/damp, Dusty, Noisy
-Personal Suitability: Positive attitude, Energetic, Hardworking, Reliability, Organized, Efficiency, Adaptability, Collaborative, Dependability, Team player, Flexibility, Able to prioritize tasks, Safety focused
-Weight Handling: Up to 45kg (100 lbs.)
-Language: English is required.
Salary: $36.92 hourly, 42.5 - 44 Hours per week
Benefits: Dental and health benefits provided. Uniforms and tools will be provided at no cost.
Important Information: The employee will work Monday through Friday, from 8 am to 5 pm. The schedule includes 30 minutes of unpaid lunch break and 30 minutes of paid healthy breaks. Flexibility on schedule is required. Shifts may vary according to the business’ needs. Occasional overtime will be required.
Apply by e-mail to: [email protected]
Apply by mail to: 1074 Upper Wellington Street, Hamilton, ON, L9A 3S6
Job Criteria:
Start Date:
Position Type: Full-Time Permanent
Experience: 2-5
Education: Bachelors
Travel:
Vacation:
Company Profile:
Day & Campbell Limited is a family-owned and operated business founded in 1946. We manufacture Autoclaved and Concrete Slag Block in a wide range of colours and finishes. Our team has very extensive knowledge and experience in various sectors of both the landscape and construction industry; including design, installation, cleaning and maintenance.
Contact Information:
| Contact Name: Day & Campbell Limited | Type: Employer |
| Company: Day & Campbell Limited |