HVAC Project Engineer Job
If this is a scam...
Mark as SPAM
Thank you for helping!...
Undo
Employer: FOUR SEASONS DC HVAC
SpiderID: 14207745
Location: 750 Oakdale Road, Unit 26, North York, Ontario M3N 2Z4, Ontario
Posted: 7/13/2026
Wage: $46.15-$50.00 per hour
Priority Review Date: 10/11/2026
Job Code / NOC / SOC:
Category: Engineering
Job Description:
NOC: 21301 – Mechanical Engineers
Employer: FOUR SEASONS DC HVAC
Position: HVAC Project Engineer
Business Address: 750 Oakdale Road, Unit 26, North York, Ontario M3N 2Z4
Work Location: Same as above; May require travelling to various project sites throughout the Greater Toronto Area
Employment Type: Permanent, full-time
Number of Positions: 1
Wage: $46.15-$50.00 per hour
Hours of Work: 30-40 hours per week
Overtime: Paid at 1.5 times the regular hourly rate after 44 hours per week
Vacation: 4% of gross wages
Benefits: Group insurance benefits, including medical, dental and vision coverage on a cost-sharing basis
Anticipated Start Date: As soon as possible
Job Description
FOUR SEASONS DC HVAC is seeking an experienced HVAC Project Engineer to plan, design, coordinate and oversee heating, ventilation and air-conditioning projects. The successful candidate will provide engineering and project-management support throughout the design, procurement, installation, testing, commissioning and handover stages of commercial and residential HVAC projects.
Essential Functions and Major Responsibilities
Assess project specifications, architectural and engineering drawings, client requirements, site conditions and applicable building standards to determine HVAC system requirements.
Develop and review HVAC system designs, equipment layouts, mechanical drawings, schematics, specifications and technical documentation.
Perform or review heating and cooling load calculations, ventilation calculations, duct sizing, airflow requirements and equipment-capacity assessments.
Assist in selecting HVAC equipment and components, including furnaces, air-conditioning units, heat pumps, rooftop units, air-handling units, fans, pumps, controls and associated mechanical equipment.
Plan and manage HVAC projects from the initial design and estimating stages through installation, testing, commissioning and final turnover.
Prepare project scopes of work, material take-offs, cost estimates, equipment schedules, project timelines and technical reports.
Coordinate HVAC designs and installation requirements with architectural, structural, electrical, plumbing, fire-protection and building-automation systems.
Review shop drawings, equipment manuals, requests for information, change orders and technical submissions from suppliers and subcontractors.
Provide technical direction and construction support to project coordinators, site supervisors, HVAC technicians, installers, subcontractors and suppliers.
Conduct project-site visits to verify field conditions, resolve design or installation conflicts and assess compliance with approved drawings and specifications.
Review the installation of ductwork, piping, mechanical equipment, controls and related HVAC components for conformity with project requirements.
Develop and review testing, balancing, start-up and commissioning procedures for HVAC systems.
Coordinate equipment start-up, system testing, deficiency correction and commissioning activities with technicians, contractors, suppliers and clients.
Investigate HVAC system performance issues and recommend technical modifications to improve system reliability, energy efficiency and operational performance.
Maintain accurate project documentation, including design revisions, progress reports, technical correspondence, commissioning records, deficiency lists and as-built information.
Identify project risks, design conflicts, cost variances and schedule delays, and assist in developing appropriate mitigation plans.
Employer: FOUR SEASONS DC HVAC
Position: HVAC Project Engineer
Business Address: 750 Oakdale Road, Unit 26, North York, Ontario M3N 2Z4
Work Location: Same as above; May require travelling to various project sites throughout the Greater Toronto Area
Employment Type: Permanent, full-time
Number of Positions: 1
Wage: $46.15-$50.00 per hour
Hours of Work: 30-40 hours per week
Overtime: Paid at 1.5 times the regular hourly rate after 44 hours per week
Vacation: 4% of gross wages
Benefits: Group insurance benefits, including medical, dental and vision coverage on a cost-sharing basis
Anticipated Start Date: As soon as possible
Job Description
FOUR SEASONS DC HVAC is seeking an experienced HVAC Project Engineer to plan, design, coordinate and oversee heating, ventilation and air-conditioning projects. The successful candidate will provide engineering and project-management support throughout the design, procurement, installation, testing, commissioning and handover stages of commercial and residential HVAC projects.
Essential Functions and Major Responsibilities
Assess project specifications, architectural and engineering drawings, client requirements, site conditions and applicable building standards to determine HVAC system requirements.
Develop and review HVAC system designs, equipment layouts, mechanical drawings, schematics, specifications and technical documentation.
Perform or review heating and cooling load calculations, ventilation calculations, duct sizing, airflow requirements and equipment-capacity assessments.
Assist in selecting HVAC equipment and components, including furnaces, air-conditioning units, heat pumps, rooftop units, air-handling units, fans, pumps, controls and associated mechanical equipment.
Plan and manage HVAC projects from the initial design and estimating stages through installation, testing, commissioning and final turnover.
Prepare project scopes of work, material take-offs, cost estimates, equipment schedules, project timelines and technical reports.
Coordinate HVAC designs and installation requirements with architectural, structural, electrical, plumbing, fire-protection and building-automation systems.
Review shop drawings, equipment manuals, requests for information, change orders and technical submissions from suppliers and subcontractors.
Provide technical direction and construction support to project coordinators, site supervisors, HVAC technicians, installers, subcontractors and suppliers.
Conduct project-site visits to verify field conditions, resolve design or installation conflicts and assess compliance with approved drawings and specifications.
Review the installation of ductwork, piping, mechanical equipment, controls and related HVAC components for conformity with project requirements.
Develop and review testing, balancing, start-up and commissioning procedures for HVAC systems.
Coordinate equipment start-up, system testing, deficiency correction and commissioning activities with technicians, contractors, suppliers and clients.
Investigate HVAC system performance issues and recommend technical modifications to improve system reliability, energy efficiency and operational performance.
Maintain accurate project documentation, including design revisions, progress reports, technical correspondence, commissioning records, deficiency lists and as-built information.
Identify project risks, design conflicts, cost variances and schedule delays, and assist in developing appropriate mitigation plans.
Job Requirements:
Employment Requirements
A bachelor’s degree in mechanical engineering, energy systems engineering, building services engineering, electrical engineering, electromechanical engineering or another closely related engineering discipline is required.
A minimum of five years of engineering or project-management experience in HVAC, mechanical, electrical, electromechanical, MEP, building services or construction projects is required.
Experience coordinating multidisciplinary engineering, procurement, construction, testing or commissioning activities is required.
Experience preparing or reviewing technical drawings, specifications, material take-offs, cost estimates and project schedules is required.
Knowledge of HVAC equipment, mechanical systems, building controls, testing and commissioning principles is required.
Proficiency in AutoCAD and Microsoft Office applications is required.
Experience with Revit MEP, AutoCAD MEP, HVAC load-calculation software or project-management software is an asset.
Strong project planning, technical analysis, problem-solving, communication and organizational skills are required.
Ability to read and interpret architectural, mechanical, electrical and construction drawings is required.
A valid Ontario driver’s licence is preferred.
Eligibility for registration with Professional Engineers Ontario is an asset.
Professional Engineer designation is required only where the employee will independently approve or seal engineering documents.
Language Requirements: English at an intermediate level
How to Apply
Qualified candidates may apply by email to:
Email: [email protected]
Subject line: Application-HVAC Project Engineer
Applicants should submit:
A current Resume
A brief cover letter describing their HVAC, mechanical, energy systems, or MEP project experience
Copies of relevant educational credentials or professional certifications, if requested
A bachelor’s degree in mechanical engineering, energy systems engineering, building services engineering, electrical engineering, electromechanical engineering or another closely related engineering discipline is required.
A minimum of five years of engineering or project-management experience in HVAC, mechanical, electrical, electromechanical, MEP, building services or construction projects is required.
Experience coordinating multidisciplinary engineering, procurement, construction, testing or commissioning activities is required.
Experience preparing or reviewing technical drawings, specifications, material take-offs, cost estimates and project schedules is required.
Knowledge of HVAC equipment, mechanical systems, building controls, testing and commissioning principles is required.
Proficiency in AutoCAD and Microsoft Office applications is required.
Experience with Revit MEP, AutoCAD MEP, HVAC load-calculation software or project-management software is an asset.
Strong project planning, technical analysis, problem-solving, communication and organizational skills are required.
Ability to read and interpret architectural, mechanical, electrical and construction drawings is required.
A valid Ontario driver’s licence is preferred.
Eligibility for registration with Professional Engineers Ontario is an asset.
Professional Engineer designation is required only where the employee will independently approve or seal engineering documents.
Language Requirements: English at an intermediate level
How to Apply
Qualified candidates may apply by email to:
Email: [email protected]
Subject line: Application-HVAC Project Engineer
Applicants should submit:
A current Resume
A brief cover letter describing their HVAC, mechanical, energy systems, or MEP project experience
Copies of relevant educational credentials or professional certifications, if requested
Job Criteria:
Start Date:
Position Type: Full-Time Permanent
Experience:
Education: Bachelors
Travel:
Vacation:
Job Benefits:
Health/Dental Benefits
Contact Information:
| Contact Name: FOUR SEASONS DC HVAC | Type: Employer |
| Company: FOUR SEASONS DC HVAC |