Drywall Finisher Job
If this is a scam...
Mark as SPAM
Thank you for helping!...
Undo
Employer: SRS Drywall Ltd
SpiderID: 14216203
Location: Burnaby, British Columbia
Posted: 7/29/2026
Wage: $32.00/hr
Priority Review Date: 10/27/2026
Job Code / NOC / SOC: 73102
Category: Building Trades/Construction
Job Description:
Employer : SRS Drywall Ltd
Location : Various locations with base at 4032 Irmin Street, Burnaby, BC, V5J 1X4
Job Title : Drywall Finisher
NOC Code : 73102
Positions Available : 2
Term : Permanent, Full Time (35 hours/week)
Salary : $32.00/hr
Start Date : As soon as possible
Education : High School
Language : English
Experience : 1 year or more
Duties:
• Measure, cut, fit, and install drywall sheets.
• Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings.
• Tape over joints using taping machine and embed tape in the compound.
• Apply successive coats of compound and sand seams and joints.
• Position and secure sheets to metal or wooden studs or joists.
• Cut and install metal corner beads to protect exterior corners.
• Fill joints, nail indentations, holes and cracks with joint compound using a trowel and broad knife.
• Smooth out the excess compound and allow coat to dry.
Please apply to [email protected] with your contact details and resume or mail at 4032 Irmin Street, Burnaby, BC, V5J 1X4
Location : Various locations with base at 4032 Irmin Street, Burnaby, BC, V5J 1X4
Job Title : Drywall Finisher
NOC Code : 73102
Positions Available : 2
Term : Permanent, Full Time (35 hours/week)
Salary : $32.00/hr
Start Date : As soon as possible
Education : High School
Language : English
Experience : 1 year or more
Duties:
• Measure, cut, fit, and install drywall sheets.
• Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings.
• Tape over joints using taping machine and embed tape in the compound.
• Apply successive coats of compound and sand seams and joints.
• Position and secure sheets to metal or wooden studs or joists.
• Cut and install metal corner beads to protect exterior corners.
• Fill joints, nail indentations, holes and cracks with joint compound using a trowel and broad knife.
• Smooth out the excess compound and allow coat to dry.
Please apply to [email protected] with your contact details and resume or mail at 4032 Irmin Street, Burnaby, BC, V5J 1X4
Contact Information:
| Contact Name: | Type: |
| Company: |