Drywall Finisher Job
If this is a scam...
Mark as SPAM
Thank you for helping!...
Undo
Employer: Aardee Construction
SpiderID: 14169085
Location: Bedford, Nova Scotia
Posted: 4/20/2026
Wage:
Priority Review Date: 7/19/2026
Job Code / NOC / SOC:
Category: Building Trades/Construction
Job Description:
Employer : 16066682 Canada Inc O/A Aardee Construction.
Location : Various locations with base at 2 Christie court, Bedford, NS, B4A 4C4 Canada.
Job Title : Drywall Finisher
NOC Code : 73102
Positions Available : 2
Term : Permanent, Full Time (35 hours/week)
Salary : $31.00/hr
Start Date : As soon as possible
Education : High School
Language : English
Experience : 2 to 3 years
Benefit: Meals will be covered.
Duties:
• Measure, cut, fit, and install drywall sheets.
• Position and secure sheets to metal or wooden studs or joists.
• Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings.
• Cut and install metal corner beads to protect exterior corners.
• Tape over joints using taping machine and embed tape in compound.
• Apply successive coats of compound and sand seams and joints.
• Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife.
• Smooth out excess compound and allow coat to dry.
Please apply to [email protected]. with your contact details and resume or mail at 2 Christie court, Bedford, NS, B4A 4C4 Canada.
Location : Various locations with base at 2 Christie court, Bedford, NS, B4A 4C4 Canada.
Job Title : Drywall Finisher
NOC Code : 73102
Positions Available : 2
Term : Permanent, Full Time (35 hours/week)
Salary : $31.00/hr
Start Date : As soon as possible
Education : High School
Language : English
Experience : 2 to 3 years
Benefit: Meals will be covered.
Duties:
• Measure, cut, fit, and install drywall sheets.
• Position and secure sheets to metal or wooden studs or joists.
• Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings.
• Cut and install metal corner beads to protect exterior corners.
• Tape over joints using taping machine and embed tape in compound.
• Apply successive coats of compound and sand seams and joints.
• Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife.
• Smooth out excess compound and allow coat to dry.
Please apply to [email protected]. with your contact details and resume or mail at 2 Christie court, Bedford, NS, B4A 4C4 Canada.
Contact Information:
| Contact Name: Rashpreet Singh | Type: |
| Company: Aardee Construction |