Container Maintenance and Painter - 2338659 Job
If this is a scam...
Mark as SPAM
Thank you for helping!...
Undo
Employer: Waste Management
SpiderID: 14080410
Location: LONDON, Ontario
Posted: 10/13/2025
Wage:
Priority Review Date: 1/11/2026
Job Code / NOC / SOC: 2338659
Category: Welder
Job Description:
I. Job Summary
Installs, services, and repairs refuse compactors at the customer's location.
II. Essential Duties and Responsibilities
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.
Must have general welding, electrical and hydraulic skills and must be able to fabricate metal on site as needed; must also be able to read electrical and hydraulic schematics.
Performs routinely scheduled services to the refuse compactor at the customer's locations. Inspects, greases, changes/filters hydraulic oil, and changes filters on the refuse compactors. Adds hydraulic oil as needed.
Checks the units for stress cracks and other safety hazards.
Checks the electrical connections, replaces the circuits, solenoids and pressure switches and repairs wiring as needed.
Operates the units, checks the pressure with a gauge and adjusts the cycle speed as needed.
Installs and replaces total units.
Uses a hammer drill to anchor the units and mount the guard rails.
Fabricates hopper, shoots, platforms, steps and handrails.
Tests, diagnoses and repairs hydraulic hoses and systems.
Performs service calls to make site repairs.
Repairs products by dismantling, straightening, reshaping, and reassembling parts using a cutting torch, porta-power, sledge hammer, and hand tools.
Maneuvers the service truck safely to and from the service location.
Instructs site personnel on the proper operational procedures and has a safety standard sheet signed by the site supervisor.
III. Supervisory Responsibilities
This job has no supervisory duties.
IV. Qualifications
The requirements listed below are representative of the qualifications necessary to perform the job.
A. Education and Experience
Required: Two years previous experience.
Preferred: High school diploma or G.E.D (accredited)
B. Certificates, Licenses, Registrations or Other Requirements
Must be legally eligible to work in Canada with a valid Canadian SIN (social insurance number).
C. Other Knowledge, Skills or Abilities Required
None required.
V. Work Environment
Listed below are key points regarding environmental demands and work environment of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job.
Required to use motor coordination with finger dexterity (such as keyboarding, machine operation, etc) most of the work day;
Required to exert physical effort in handling objects less than 30 pounds occasionally;
Required to be exposed to physical occupational risks (such as cuts, burns, exposure to toxic chemicals, etc) occasionally;
Required to be exposed to physical environment which involves dirt, odors, noise, weather extremes or similar elements occasionally;
Normal setting for this job is: outside/compactor repair.
The expected base pay range for this on-site position is 31.64 hourly. This range represents a good faith estimate for this position. The specific salary offered to a successful candidate may be influenced by a variety of factors including the candidate’s relevant experience, education, training, certifications, qualifications, and work location.
Benefits
At Waste Management, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short Term Disability. Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site.
Please apply now on the site below, or call 877.220.5627, to speak with a Waste Management recruiter today
http://emcm.fa.us2.oraclecloud.com/hcmUI/CandidateExperience/en/sites/WMCareers/job/2338659
Equal Opportunity Employer Minority/Female/Disability/Veteran
Installs, services, and repairs refuse compactors at the customer's location.
II. Essential Duties and Responsibilities
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.
Must have general welding, electrical and hydraulic skills and must be able to fabricate metal on site as needed; must also be able to read electrical and hydraulic schematics.
Performs routinely scheduled services to the refuse compactor at the customer's locations. Inspects, greases, changes/filters hydraulic oil, and changes filters on the refuse compactors. Adds hydraulic oil as needed.
Checks the units for stress cracks and other safety hazards.
Checks the electrical connections, replaces the circuits, solenoids and pressure switches and repairs wiring as needed.
Operates the units, checks the pressure with a gauge and adjusts the cycle speed as needed.
Installs and replaces total units.
Uses a hammer drill to anchor the units and mount the guard rails.
Fabricates hopper, shoots, platforms, steps and handrails.
Tests, diagnoses and repairs hydraulic hoses and systems.
Performs service calls to make site repairs.
Repairs products by dismantling, straightening, reshaping, and reassembling parts using a cutting torch, porta-power, sledge hammer, and hand tools.
Maneuvers the service truck safely to and from the service location.
Instructs site personnel on the proper operational procedures and has a safety standard sheet signed by the site supervisor.
III. Supervisory Responsibilities
This job has no supervisory duties.
IV. Qualifications
The requirements listed below are representative of the qualifications necessary to perform the job.
A. Education and Experience
Required: Two years previous experience.
Preferred: High school diploma or G.E.D (accredited)
B. Certificates, Licenses, Registrations or Other Requirements
Must be legally eligible to work in Canada with a valid Canadian SIN (social insurance number).
C. Other Knowledge, Skills or Abilities Required
None required.
V. Work Environment
Listed below are key points regarding environmental demands and work environment of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job.
Required to use motor coordination with finger dexterity (such as keyboarding, machine operation, etc) most of the work day;
Required to exert physical effort in handling objects less than 30 pounds occasionally;
Required to be exposed to physical occupational risks (such as cuts, burns, exposure to toxic chemicals, etc) occasionally;
Required to be exposed to physical environment which involves dirt, odors, noise, weather extremes or similar elements occasionally;
Normal setting for this job is: outside/compactor repair.
The expected base pay range for this on-site position is 31.64 hourly. This range represents a good faith estimate for this position. The specific salary offered to a successful candidate may be influenced by a variety of factors including the candidate’s relevant experience, education, training, certifications, qualifications, and work location.
Benefits
At Waste Management, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short Term Disability. Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site.
Please apply now on the site below, or call 877.220.5627, to speak with a Waste Management recruiter today
http://emcm.fa.us2.oraclecloud.com/hcmUI/CandidateExperience/en/sites/WMCareers/job/2338659
Equal Opportunity Employer Minority/Female/Disability/Veteran
Job Criteria:
Start Date:
Position Type: Full-Time Permanent
Experience:
Education:
Travel:
Vacation:
Job Benefits:
Health/Dental Benefits, Retirement Benefits, Paid Holidays, Vacations, and Sick Leave
Contact Information:
| Contact Name: Waste Management | Type: |
| Company: |