CNC Machinist/Programmer Job
If this is a scam...
Mark as SPAM
Thank you for helping!...
Undo
Employer: Snap On
SpiderID: 14238917
Location: Willoughby, Ohio
Posted: 9/13/2026
Wage: Negotiable
Priority Review Date: 10/13/2026
Job Code / NOC / SOC: 2026-20564-2910
Category: Transportation/Air, Sea & Land
Job Description:
Overview
Norbar Torque Tools, a member of the Snap-on Incorporated family of companies, is seeking a CNC Machinist/Programmer. The hourly pay rate is $30 to $33 per hour depending on experience.
Responsibilities
• Performs typical machine shop operations to support engineering.
• Detects and reports defective materials or questionable conditions to the supervisor.
• Maintains the work area and equipment in a clean orderly condition.
• Maintains the work area and equipment in a clean orderly condition and follows prescribed safety regulations.
• Must be able to perform but not limited to the following tasks: milling, turning, drilling, tapping, de-burring, bench operations and inspection.
• Maintain CAM system and perform daily programming on parts.
• Must be able to proficiently program, operate and troubleshoot a CNC machining center.
• Must be able to inspect parts against the supplied prints.
• Must be able to set up run operations on a CNC machine with or without supervision.
• Maintain and organize inventory of tooling.
• Consult with engineering on design with respect to manufacturing processes.
• Transport parts and work with outside vendors on secondary and finishing operations.
•Must be able to follow directions and assist with assembly of products.
Qualifications
We are an Equal Opportunity Employer,minority/female/disabled/veteran
Norbar Torque Tools, a member of the Snap-on Incorporated family of companies, is seeking a CNC Machinist/Programmer. The hourly pay rate is $30 to $33 per hour depending on experience.
Responsibilities
• Performs typical machine shop operations to support engineering.
• Detects and reports defective materials or questionable conditions to the supervisor.
• Maintains the work area and equipment in a clean orderly condition.
• Maintains the work area and equipment in a clean orderly condition and follows prescribed safety regulations.
• Must be able to perform but not limited to the following tasks: milling, turning, drilling, tapping, de-burring, bench operations and inspection.
• Maintain CAM system and perform daily programming on parts.
• Must be able to proficiently program, operate and troubleshoot a CNC machining center.
• Must be able to inspect parts against the supplied prints.
• Must be able to set up run operations on a CNC machine with or without supervision.
• Maintain and organize inventory of tooling.
• Consult with engineering on design with respect to manufacturing processes.
• Transport parts and work with outside vendors on secondary and finishing operations.
•Must be able to follow directions and assist with assembly of products.
Qualifications
- High school diploma or GED required.
- Minimum 3 years of relevant work history
- Must be able to read and interpret drawings, follow routers, use simple math, and use basic hand held measuring tools.
- Must have valid driver's license and be able to operate the company vehicle.
- Must have prior knowledge operating and programming CNC machines.
- CAM and/or 3D modeling highly desirable
- Mechanic/Repair experience a plus
We are an Equal Opportunity Employer,minority/female/disabled/veteran
Job Criteria:
Start Date: ASAP
Position Type: Full-Time Permanent
Experience:
Education:
Travel:
Vacation:
Contact Information:
| Contact Name: Snap On | Type: |
| Company: Snap On |