2 full time and permanent plumbers Job
Employer: SWR Drain Service
SpiderID: 13762262
Location: Surrey, British Columbia
Posted: 6/4/2024
Wage:
Priority Review Date: 9/2/2024
Job Code / NOC / SOC:
Category: Maintenance/Janitorial Services
Job Description:
SWR Drain Service located at 15380 67 Ave, Surrey, BC, V3S3L4(see http://swrdrainservice.com) requires 2 full time and permanent plumbers. The work location will take place across all towns Fraser Valley Langley, Maple Ridge, Pit Meadows, Coquitlam, Vancouver, White Rock, Surrey, New Westminster, etc.)
Duties
• Read blueprints, drawings and specifications to determine layout of plumbing system, water supply network and waste and drainage systems
• Install, repair and maintain domestic, commercial or industrial plumbing fixtures and systems
• Locate and mark positions for pipe connections, passage holes and fixtures in walls and floors
• Cut opening in walls and floors to accommodate pipe and pipe fittings
• Measure, cut, bend and thread pipes using hand and power tools or machines
• Join pipes using couplings, clamps, screws, bolts, cement or soldering, brazing and welding equipment
• Test pipes for leaks using air and water pressure gauges
• May prepare cost estimates.
• Use a power snake, hydro jetting, and do camera inspection
• Drain system troubleshooting, maintenance and repairs
• Experienced in maintenance/repairs of plumbing and drainage systems
Qualifications/Requirements
• Plumber Trade Certificate from any jurisdiction
• Excavation experience beneficial
• Fluent in English
Wages
• $31.25 to $33 per hour
How to apply
When you apply, please send the following to [email protected]
• Resume
• Please answer the following questions and include it with your application for this position:
1. Trap arms and fixture drains are to be installed with roughly_____of an inch downward slope for every foot of trap arm length ?
2. The Propane Storage and Handling Code is ______?
3. The ideal location for a circulator pump installed in a hot water heating system is_____?
4. What is the pressure in water at 150m depth?
If you do not send all of the above items when you apply, your application will not be considered.
Duties
• Read blueprints, drawings and specifications to determine layout of plumbing system, water supply network and waste and drainage systems
• Install, repair and maintain domestic, commercial or industrial plumbing fixtures and systems
• Locate and mark positions for pipe connections, passage holes and fixtures in walls and floors
• Cut opening in walls and floors to accommodate pipe and pipe fittings
• Measure, cut, bend and thread pipes using hand and power tools or machines
• Join pipes using couplings, clamps, screws, bolts, cement or soldering, brazing and welding equipment
• Test pipes for leaks using air and water pressure gauges
• May prepare cost estimates.
• Use a power snake, hydro jetting, and do camera inspection
• Drain system troubleshooting, maintenance and repairs
• Experienced in maintenance/repairs of plumbing and drainage systems
Qualifications/Requirements
• Plumber Trade Certificate from any jurisdiction
• Excavation experience beneficial
• Fluent in English
Wages
• $31.25 to $33 per hour
How to apply
When you apply, please send the following to [email protected]
• Resume
• Please answer the following questions and include it with your application for this position:
1. Trap arms and fixture drains are to be installed with roughly_____of an inch downward slope for every foot of trap arm length ?
2. The Propane Storage and Handling Code is ______?
3. The ideal location for a circulator pump installed in a hot water heating system is_____?
4. What is the pressure in water at 150m depth?
If you do not send all of the above items when you apply, your application will not be considered.
Job Criteria:
Start Date:
Position Type: Full-Time Permanent
Experience:
Education:
Travel:
Vacation:
Contact Information:
| Contact Name: Jacobus Kriek | Type: |
| Company: |