Production Expeditor Resume
|Desired Industry: Manufacturing
|Desired Job Location: Commerce, Texas
||Date Posted: 8/27/2012
|Type of Position: Full-Time Permanent
||Availability Date: 9/04/12
||U.S. Work Authorization: Yes
|Job Level: Experienced with over 2 years experience
||Willing to Travel: No
|Highest Degree Attained: Other
||Willing to Relocate: No
Self-driven, highly motivated individual
that possesses the ability to plan,
implement and evaluate multiple projects
simultaneously and meet deadlines. I am
honest, dependable and energetic with a
commitment to excellence.
My objective is to pursue a position as
an Expeditor which anticipates and
recognizes the bottlenecks and evaluates
the situation to minimize downtime or
delays in the logistics, production and
shipping processes and maximize outputs.
Stockroom Lead / Receiving Clerk
Special Products & Mfg. Inc.
Rockwall, TX. 06/2005 to 8/2012
Unloaded materials, BOM and MRO items
and verified the product and paperwork
against po, measured, counted and
received into the computer system. Items
were stocked, issued or dispositioned to
the requisitioner. MRO items were
handed out to manufacturing and
adjusted. Cycle counts were performed
and concerns were investigated with
adjustments made, if required.
Responsible for the safety and
housekeeping of the stockroom and
receiving areas. Kanban cabinet was
set-up in manufacturing to minimize
trips to stockroom. Recommended reorder
points and Max-On-Hand for expense
Cytec Engineered Materials
Greenville, TX. 2/2005 to 6/2005
Setup machines daily, inspected product
quality prior to winding on roll for
storage. Housekeeping was performed
during and at the end of each day.
VertexSI (General Dynamics - Satcom)
Richardson, TX. 6/1998 to 8/2004
Created a forecast biweekly and material
buys to support the manufacturing plan.
Responsible for the monitoring and
reconciliation of the product costs.
Transfers were performed monthly.
Greenville, TX. 11/1994 - 5/1997
Responsible for the planning of raw
materials for the Greenville Operations
(inhouse and at outside molders).
Texas A&M University Some college
work completed Commerce, TX.
North Texas APICS Chapter BSCM
Module completed Addison, TX.
Collin County Community College
Certified Logistics Technician (CLT)
I have worked in plastics, sheet metal
and electronics manufacturing
environments. I have utilized various
production software packages including
MSOffice Word / Excel / Access / Outlook
as well as other similar packages.
Familiar with the use of various
measuring and counting devices such as
calipers, micrometers and digital weigh-
Familiar with the operation of electric
and gas forklifts, electric and manual
pallet jacks, tow motors and overhead
cranes. The last professional
certification for forklifts expired
April 07 but SPM maintained an internal
safety program which certified each
forklift operator internally.
Available upon request.
Candidate Contact Information:
|JobSpider.com has chosen not to make contact information available on this page.
Click "Contact Candidate" to send this candidate a response.