Welder Fabrication Resume
|Desired Industry: Manufacturing
|Desired Job Location: Roseville, Minnesota
||Date Posted: 1/17/2012
|Type of Position: Full-Time Permanent
||Availability Date: 1/17/2012
|Desired Wage: 17.00
||U.S. Work Authorization: Yes
|Job Level: Experienced with over 2 years experience
||Willing to Travel: Yes, More Than 75%
|Highest Degree Attained: Other
||Willing to Relocate: Undecided
Manufacture / Production / Welding / Quality Inspections / Machine Operation Transportation
●Curtis – 1000 Fortune 500 (Volt Workforce Solutions), Woodbury, MN October 2011- November 2011
●Set-Up on machines to collate or a fold currency envelopes & mail envelopes boxed & package large orders
delivering orders using a pallet jack to the shipping dept for on time shipments.
Quality Inspector, Goodrich Aerospace, (Superior Technical Resources), Brooklyn Cntr, MN June 2011- August 2011
●Area of Inspection in the Sensors Integration System Division Dept on Air Data Probes to measure air speed.
●Responded to Customer’s Specifications Drawings, Manufacturing Engineer Drawings and Routings.
●Usage of Calipers, Micrometers, Pin, Ring, High Gauges, calibrated Measuring Tools and First Articles, In-Process and Final
Inspection SAP Computer Programs completion.
Electronic Assembly, Ayrshire Electronics, (Express Professional Services), Woodbury, MN April 2010
•Microscope used for soldering of electrical components on PC boards
•Quality control inspection and testing of small components
Medical Assembly, Great batch Inc, (Superior Technical Group), Brooklyn Center, MN May 2008-July 2008
•Assembled medical catheters and stints, in a “Clean Room” environment
•Microscope & quality inspection
Data Entry, Cross Country Courier Inc, Eagan, MN July 2008-October 2008
•Processed incoming/outgoing invoices and orders using MS Excel and MS Word
•Order entry and manifest creation
•Prepared daily drivers deliveries
Quality Inspector, Travel Tags, (QC Group Staffing), Burnsville, MN June 2005-October 2005
•Gift Card quality control through visual inspections and computer data & first articles inspections. Included verification of magnetic strip data and numerical information recorded. Distribution was to corporations including, but not limited to, Target, Macy’s and Walt Disney World
Transit Bus Operator, Metropolitan Council (MTC), St Paul, MN, December 2006-May 2008
P / T Bus Operator, First Student, St. Paul, MN, July 2003- November 2006
Transit/Charter Bus Operator, Lorenz Bus Service, Minneapolis, MN, June 2003- September 2004
•Hold an up-to-date 2011 Valid Commercial Driving License
•Safely transported passengers to destinations, including long distance and on-time schedules.
•Provided services to disabled individuals with proper use of lifting equipment consistently.
Bindery promoted to Mail Clerk, Xcel Energy, (Entegee) Plymouth, MN April 2000-June 2003
•Prepared specific information, high demand customer orders set – ups using cutting machine, lamination, gluing, bundling, folding and collating
•Accurately and efficiently weighed ground cargo shipped thru Fed Ex and UPS
•Routed large volumes of incoming and outgoing mail using their computer database
•Sorted by visualization inter-company branch mail
Someone who‘s flexible, a self starter, committed to quality service, accuracy and completing all work tasks dependable worker willing and able to adapt to new changes as well as new challenges.
Welding Fabrication Associates Degree Diploma December 2010
Saint Paul Technical College 235 Marshall Avenue St Paul, MN 55102 ▪ www.saintpaul.edu
Electronic Medical Assembly January 2009
East Metro OIC, 1919 University Ave. W. Ste # 500 St. Paul, MN 55104
Transferred Credits to Saint Paul College
GED Diploma February 2005 General Studies Ronald Hubbs Long Life Learning Center
1030 University Avenue West Saint Paul, MN 55104
Preparation - Welders Qualification, TIG & MIG Welding, Electrode Rods Welding 6010 - 7018, Wire Feed, Submerge Arc Welding, Pulse & Spray Pulse, Flux Core, Dual Shield, Oxycetelene & Brazing, Grinding & Finishing, Deburring, Blue Print Reading 1 & 2, Measurements with the usage of a micrometer, caliper, gauges and Hand & Shop Equipment, Accurately and efficiently running programs with CNC Programming, Radan, Computer Laser Robotics, Press Brake, Plasma Cutter and Burniers. Materials used Stainless Steel, Mild Steel, Aluminum and Cold Rolled Steel and several different size gauges.
I am available if some one would notice me and give me a chance to display my welding skills and knowledge thank you.
Available upon request.
Candidate Contact Information:
|JobSpider.com has chosen not to make contact information available on this page.
Click "Contact Candidate" to send this candidate a response.