Program Project Manager - Engineering Resume Search
Program Project Manager - Engineering Resume Search
My Spider Scam Awareness Contacting Us F. A. Q.
 
Job Seekers
Search Jobs
Browse Jobs
Post a Resume
Job Alerts
 
Employers
Search Resumes
Browse Resumes
Post a Job

Program/Project Manager Resume


Desired Industry: Engineering SpiderID: 61095
Desired Job Location: McKinney, Texas Date Posted: 5/31/2012
Type of Position: Full-Time Permanent Availability Date: Immediately
Desired Wage: 95000
U.S. Work Authorization: Yes
Job Level: Experienced with over 2 years experience Willing to Travel: Yes, 25-50%
Highest Degree Attained: Bachelors Willing to Relocate: No


Objective:
Highly analytical and hands-on engineer
with advanced ability in providing
strategic leadership. Knowledgeable of
integrated product development system,
structural and thermal analysis
concepts, techniques, as well as
aircraft structures. Adept in
configuration management concepts used
in large defense programs, data
gathering, and engineering investigation
fundamentals. Possess exceptional
communication, team management, and
organizational skills. Proficient in
Microsoft Excel Engineering Calculations
and Data Analysis; CAD Software
including Pro/ENGINEER Wildfire,
SolidWorks, Pro/MECHANICA, ANASYS
Icepak; as well as Microsoft Visio,
Microsoft Project, Microsoft Office
Suite, and IBM Doors Requirement
Management Suite.


Experience:
SABRE SYSTEMS, DALLAS, TX
SENIOR PRINCIPLE ENGINEER | AIRBORNE
Systems 2008–Present

Delegated as Integrated Product Team
Lead (IPTL) for the mechanical systems,
with responsibilities of maintaining the
Littoral Surveillance Radar System
(LSRS)’s pod structure

that included electrical hardware within
the radar, pod environmental control
systems and hardware, and P-3C Orion
structural modifications required to
ensure flight safety.

Maintain adherence of project to
allotted requirements and specifications
as well as program schedule and cost
constraints. Managed the development of
plan, status, and

forecasting; monitoring of contractor’s
progress using EVMS tools; and all
aspects of the manufacturing processes,
engineering changes and drawing
revisions, and hardware design

changes, which directly impacted product
baseline. Conducted proposal evaluation,
product inspection, and first article
test inspections. Fostered technical
collaboration among

multiple contractors associated with the
program.

RAYTHEON COMPANY, DALLAS, TX
SENIOR MECHANICAL ENGINEER | TEST
ENGINEER 2007–2008

Supervised the Integrated Product Team
in handling mechanical design,
implementation, test, system validation,
as well as equipment evaluation that
authorized both limited

production and production system. Led
the generation of acceptance examination
procedures and requirements that
complied with customer performance
requirements.

INTEGRATED PRODUCT TEAM LEAD | SPACE &
AIRBORNE SYSTEMS 2004–2007

Performed weekly budgeting of IMS
milestones and work packages with
appropriate hours and manpower; prepared
design review artifacts; and engaged
with customer on technical and

cost risk. Carried out updating of
earned value metrics. Monitored and
presented technical performance
parameters during monthly management
meetings, negotiated requirements and

design parameters, and interacted with
the Integrated Product Team on a daily
basis.

MECHANICAL DESIGN ENGINEER | CO-OP
2002–2004

Initiated the design of parts and
assemblies in Pro/ENGINEER Wildfire;
took the 3-dimensional model; and
produced ASME-compliant drawings as well
as mechanical CAD design and

mechanical analysis on designs.
Coordinated with fellow mechanical
engineers on newly designed components,
and prepared trade studies and technical
content for program design

reviews.


Education:
Bachelor of Science in Mechanical
Engineering | GPA 3.62 – 2005
University of Oklahoma, School of
Aerospace & Mechanical Engineering,
Norman, OK

Associate of Arts in Liberal Arts | GPA
3.9 – 2002
Tulsa Community College, Tulsa, OK


Affiliations:
------


Skills:
Fluid Dynamics and Mass Flow Analysis
Heat Transfer Analysis and Thermal
Dynamics Evaluation
Structural Analysis and Mechanics
Acquisition Process and Principles
EVMS & Program Integrated Master
Schedule (IMS) Analysis Techniques
Systems Engineering Design Review
Processes and Practices
System and Component Test Planning
System Level Acceptance Test and First
Article Inspection Processes
Field Support and Troubleshooting
Configuration control and data
management practices
System Requirements and Specification
Development
SOW Performance Requirements Evaluation
Program management Principles and
Practices
Mechanical Engineering Design Principles
3D component modeling and mechanical
assembly using Pro Engineer


Additional Information:
KEY ACCOMPLISHMENTS

- Led the creation of materials
for Pro/ENGINEER Wildlife training on
behalf of Raytheon Learning Institute,
preventing the company to purchase from
outside source;

subsequently resulting in
significant savings.
- Created the modular roll
out/roll in weapons pallet for the
McAllister Ammunition Depot project
intended to ensure compliance of US
Military with environmental

standards, which accepted a DoD
grant; thereby giving the University of
Oklahoma substantial amount of profit as
well as saving costs for the US military
by not having a

contractor to develop the
system.
- Provided essential support in
the development of MathCAD curriculum
for Raytheon’s newly hired engineers
taking the required structural analysis
and thermal analysis

coursework, expanding the
knowledge base of engineers proficient
in MATHCAD within Raytheon.
- Authored a technical brief
outlining legacy system design, analysis
and performance benchmarks, and lessons
learned; which was used as point of
reference, refresher to

the community as well as program
leadership, and as part of cost and
schedule risk mitigation for the new
program.
- Received the Certificate of
Appreciation for Above and Beyond
Service issued by Advanced Sensor
Technologies Program Manager.
- Earned recognition as Employee
of the Quarter from the Advanced Sensor
Technologies Field Office Manager.
- Obtained multiple achievement
recognition awards given by various
organizations, as follows:
- Department of the Navy Advanced
Sensor Technologies Program
- Raytheon Corporation
- Sabre Systems Incorporated


PROFESSIONAL DEVELOPMENT

Raytheon Learning Institute

- Fundamentals of Heat Transfer
- Fundamentals of Structural
Analysis
- The Basics of Earned Value
Management System (EVMS)
- Integrated Product Team Lead
(IPTL) Training
- Professional Recruiting and
Interview Process Training
- Technical Document Preparation
- Six Sigma Specialist Training
- Geometric Dimensioning and
Tolerance (GD&T)
- Pro Engineer Wildfire 3.0 Course
A, B, and C
- Electro Static Discharge
Certification
- Basic Principles of Program
Management and Team Leadership

Defense Acquisition University

- Systems Planning, Research,
Development & Engineering / Systems
Engineering (Level 2 Certification)

Advanced Materials in Transport Aircraft
& Structures

- Advanced Composite Materials &
Structures Certification

American Society of Mechanical Engineers

- Tools & Methods of Finite
Element Analysis


Reference:
Available upon request.


Candidate Contact Information:
JobSpider.com has chosen not to make contact information available on this page.
Click "Contact Candidate" to send this candidate a response.


    





© 2019 Job Spider
Privacy Policy | CC Marketing Sites | Site Map | Links