Energy Engineer - Engineering Resume Search
Energy Engineer - Engineering Resume Search
My Spider Scam Awareness Contacting Us F. A. Q.
 
Job Seekers
Search Jobs
Browse Jobs
Post a Resume
Job Alerts
 
Employers
Search Resumes
Browse Resumes
Post a Job

Energy Engineer Resume


Desired Industry: Engineering SpiderID: 60590
Desired Job Location: Des Moines, Iowa Date Posted: 5/16/2012
Type of Position: Full-Time Permanent Availability Date: June 1, 2012
Desired Wage: 80,000
U.S. Work Authorization: Yes
Job Level: Experienced with over 2 years experience Willing to Travel: Yes, 25-50%
Highest Degree Attained: Bachelors Willing to Relocate: No


Objective:
Challanging Sr. Engineering position
managing construction projects from design
through commissioning; energy auditing, and
building energy use simulation, designing
HVAC, plumbing and chiller systems and with
a variety of applications in energy and
environmental code compliance, facilities
engineering and consulting engineering


Experience:





PROFESSIONAL EXPERIENCE

10-2011 to 2-2012 Fox -1 Design (Contract
Position) Project Engineer
Flint Hills Resources Ethanol Plant – Menlo, IA

Managed small capital plant upgrade projects.


1-2006 to 9-2011 State of Iowa, Department
of Administrative Services Architectural and
Engineering Services,Construction Design
Engineer, Sr.

• Project Manager for the $5 million
Geothermal, HVAC and Energy Management
Improvement Project at the Iowa Juvenile
Home in Toledo from design by consultants
through commissioning by the contractor. The
geothermal system included 330 vertical wells
and heat pumps to replace a steam boiler
system for heating and domestic water, energy
upgrades included energy efficient hot water
heaters, and window and door replacement
throughout the 10-building 140,000 Sq. Ft.
campus. Provided mechanical and
commissioning design peer review.
Determined that the designed well field would
provide 115 % of needed capacity instead of
the 37% that the consultant determined.
Enforced compliance with ASHRAE GSHP and
Geothermal System Design standards.
• Project manager on retro-commissioning
of 10 state buildings; HVAC, plumbing,
roofing, environmental, fire protection and
electrical maintenance and upgrade projects at
Glenwood, Toledo, Mt. Pleasant, Clarinda, Fort
Madison, IWD and the Capitol Building
• Designed restroom and HVAC upgrade,
provided CAD documents and wrote CSI
specifications at Toledo
• Peer review of consultant’s mechanical
designs, site review of contractor’s work and
environmental consultant’s asbestos
abatement plans
• Environmental expertise on air quality
management, mold investigation and
remediation and hazardous materials
management procedures
• Expertise on specification writing and
review
• Manages 30 projects concurrently


1-2004 to 12-2005 State of Iowa, Department
of Natural Resources State Energy Office,
Facilities Engineer, Sr.
• Energy Auditing Presentation at
University of Iowa, presenter for the DNR
Energy Analyst training
• Panel member in a DNR presentation of
wind turbine technology for public school
districts to MidAmerican and Alliant Energy
• Reviewed life cycle analysis reports,
energy audits, Technical Engineering Analysis
reports by consultants
• Performed site analysis and energy audits
on the Walnut Woods State Park and on
Springbrook State Park
• Trained in retro-commissioning of state
buildings, Grant writing

2003 to 2004 C. Frank Consulting, Panora,
IA- Mechanical Engineering Consultant
HVAC and plumbing consulting.
• 2004 Consultant to VGI Design, Des
Moines, IA
HVAC engineering and design for hospitals,
USDA Laboratory applications, IA National
Guard, Camp Dodge.
• Energy Audit and energy use simulation
using eQuest© for the Des Moines Public
Libraries, and Brooks Community Center for
the Iowa Department of Natural Resources


2001- 2003 MWH, Walnut Creek, CA- MWH is
a consulting firm specializing in the design of
wastewater treatment and water treatment
facilities, clients are municipal and Federal.
Senior Mechanical Design Engineer
Wastewater Treatment Plants
HVAC design for 25,000 square feet of space
including (4) buildings in the wastewater
treatment facility in Colorado Springs, CO. UV
and Filter Building, Control Building, Aeration
Blower Building, and associated Pump
Stations. HVAC design, equipment selection,
drawings and specifications for a new
pumping station.
Chemical Storage Facilities
Design of a ventilation system for a WTP
chemical storage building. Point blending and
chemical storage facility audit for Fire Code
compliance. Audited the facility, performed
code compliance analysis and wrote a report
of findings, saved facility non-compliance
fines and the risk of being shut down by the
fire department. Determined that a costly
sprinkler system installation was unnecessary.

2000-2001, OPTICAL COATING LABORATORY,
Division of JDS Uniphase, Santa Rosa, CA
Manufacturer of optical coatings and fiber
optics for the telecommunications industry
Sr. Mechanical Engineer, Facilities Engineering
Department- HVAC Retrofit Design for
installation of scanning electron microscopes,
photo spectrometers, clean lines, vacuum and
compressed air systems, heat exchangers and
process cooling, and tool cleaning facilities.
Clean room HVAC system retrofit.
• On-site facilities engineer for an optical
coating, research lab and fiber optic
manufacturing company consisting of 10
buildings on a 75-acre facility.
• Construction and project management,
project scheduling and estimating, system
optimization and value engineering.
• Designed and managed projects for
facility maintenance, retrofit and new
construction Supervision of construction
crews, Electrical, mechanical and plumbing
contractors and CAD designers
• Water Treatment Systems- $3 Million
Project -Conducted a feasibility study for the
combination of several individual deionized
water and reverse osmosis plants. Reviewed
consultant’s bid packages estimated the costs
to implement the new plant.

1997 – 2000 IT CORPORATION, Concord, CA
Multi-discipline Environmental Consulting firm
specializing in remediation of closed military
bases, landfill design and closure, and
environmental compliance.

Sr. Engineer-Scientist- Design of air pollution
control equipment.
• Reconstruction of mechanical heating,
ventilation and air conditioning systems in
public schools after asbestos abatement
activities. Conducted field surveys in
containment areas wearing personal
protection equipment consisting of a full tyvek
suit and full-face respirator.
• Peer review of Industrial Hygienist’s
investigation to aid in dispute mediation
between the CTA and a school district.
• Investigation of Sick Building Syndrome
complaints in office buildings in San Francisco.
Inspected building air conditioning systems,
office spaces and surveyed occupants. Set up a
mold remediation and air quality management
program.
• Developed a program to investigate
underground telecommunications cable vaults
for compliance with OSHA confined space
regulations for gas monitoring and ventilation.
Provided training to client’s site managers in
cable vault risk assessment. Design of a gas-
monitoring system.
• Designed an air treatment exhaust
system for the removal of buried drums of
hazardous waste to exceed Air Quality
Management District’s requirements, enabled
facility to re-bury remediated waste at the
same facility which eliminated the need for
Department of Transportation fees.

1995 – 1997 CONSULTING, CAROL D. FRANK,
PE, MECHANICAL ENGINEER
• IHOP Restaurant HVAC Remodel –
Compliance audit of existing HVAC, Fire
Protection, Plumbing and Refrigeration
systems.
• Lawrence Berkeley National Laboratory–
HVAC, plumbing, fire protection, and
automatic energy management control
systems for offices, labs, clean rooms, lasers,
genetic research, life science and radiation
facilities.

1991 -1995 INDUSTRIAL POWER
TECHNOLOGY, Santa Rosa, CA.
Electrical and Mechanical engineering
consulting firm specializing in hospital
building systems design and retrofit, and the
design of co-generation systems.
Associate Mechanical Engineer HVAC and
Plumbing system design including engineering
analysis, load calculations, equipment
selection for cooling towers, chiller and boiler
design projects
• Designed a cooling tower and heat
exchanger "free cooling" system for St. Helena
Hospital that enabled the facility to reduce
their annual energy costs by 30%. Performed
facility energy balances to complete PG&E
documentation for client rebate of over
$30,000.
• Provided recommendations for closure of
an existing underground fuel oil tank near a
future hospital entrance. Completed design
relocates the tank and piping to provide a
hazard free pedestrian area.
• Saint Luke’s Hospital, San Francisco.
HVAC Design- Assessment and upgrade of
existing inefficient HVAC systems. New
systems included chilled and heated water
coils and control valves packaged rooftop
HVAC units, heat exchangers, boilers, fans,
filtration and air distribution systems.
• Supervised technical and non-technical
staff. Established Construction Specifier’s
Institute (CSI) format specification standards
for IPT as a prerequisite for obtaining county
government contracts. Wrote proposals and
construction estimates, had a 90% success
rate.

1988 - 1990 SONOMA COUNTY
ARCHITECT'S OFFICE, Santa Rosa, CA.
Project Engineer, HVAC and Plumbing: Retrofit
HVAC systems for tenant improvement
projects.
• Managed capitol projects from analysis of
initial design through inspection of completed
facility.
• Conducted a performance evaluation of
the County's partial Thermal Storage Plant
after one year of operation. Interviewed
County department heads to determine job
requirements. Peer reviewed HVAC system
design by consultant engineers for
completeness and accuracy.


1977 - 1989 Proctor & Gamble/Parson
Packaging/Lawrence Livermore Labs/
Stanford Linear Accelerator/Xerox
Corporation/Abex Corporation, Remco
Hydraulics Div.
Contract Mechanical Designer/Design
Engineer



Education:
Education
1988 BSME, Mechanical Engineering, San
Francisco State University, San Francisco,
California;

1998 U. C. Berkeley Air Quality Management
Certificate - 16 Semester Units

2004 Fundamentals of Electrical Systems and
Building Electrical Energy Use –3.5 CEUs


Registrations/Certifications
• Professional Mechanical Engineer,
California; No. M29787
• Professional Mechanical Engineer,
Colorado; No. M31850, lapsed 2006
• Professional Mechanical Engineer, Iowa,
No. M16859
• National Council of Examiners for
Engineering and Surveying NCEES Certificate,
Record No. 23837
• Certified Air Quality Manager, UC
Berkeley Extension, Environmental
Management Department


Publications
“Air Pollution V” Conference Proceedings, July,
1999. Air Pollution ’99 Conference at Stanford
University.

“Design and Use of a Mobile Air Treatment
System for Air Pollution Control During the
Removal of Breached Drums of Hazardous
Waste at Drum Burial Area V, Panoche Landfill,
Solano County, California” C. Frank

Research Paper: "Air Pollution from Landfill vs.
Air Pollution from Incineration"


Affiliations:
Member of ASHRAE


Skills:
UMC, UBC, UPC, NFPA, OSHA Code
Compliance, Project Management, Bid
Analysis, Construction Cost Estimating,
Facilities Engineering, Air Quality
Management, Energy Audits, Investigations for
Building Mold Remediation, HVAC & Plumbing
Design, Boiler & Chiller Plant Retrofit, Heat
Transfer, Design for Sprinkler System Retrofit,
Working Knowledge of HVAC Controls, Value
Engineering, Electrical Plan Checking, CSI
Specifications writing, AutoCAD.


Additional Information:
• Government Applications State of Iowa
Facilities, energy upgrades (Juvenile Home,
Prisons, Mental Health Facilities), County
Complexes (Data Centers, Jails, Courtrooms,
Libraries), Army Corps of Engineers, Naval
Bases, National Research Laboratories.
• Manufacturing Application Food Industry,
Armored Vehicles, Retrofit of clean rooms for
Telecommunications & Optical Coatings
manufacture.
• Municipal Applications Boiler and Chiller
Plants, Pumping Stations, Water and
Wastewater Treatment Plants, Chemical
Storage Facilities, Industrial Garages,
Hospitals, Schools, Telecommunications Cable
Vaults.
• Environmental Applications Indoor Air
Quality Investigations, , Hazardous Materials
Project Management, Landfill Air Pollution
Systems Design and Gas Collection Systems
Design.



Candidate Contact Information:
JobSpider.com has chosen not to make contact information available on this page.
Click "Contact Candidate" to send this candidate a response.


    





© 2019 Job Spider
Privacy Policy | CC Marketing Sites | Site Map | Links