|Desired Industry: Engineering
|Desired Job Location: detriot, Michigan
||Date Posted: 11/9/2010
|Type of Position: Full-Time Permanent
||U.S. Work Authorization: Yes
|Job Level: Experienced with over 2 years experience
||Willing to Travel: Yes, Less Than 25%
|Highest Degree Attained: Other
||Willing to Relocate: Undecided
My long term goals are to develop new skills and create a complete career
Within all facets of the unigraphics engineering field.
Continue to develop and advance in my field.
Engineering Development specialist 1 08/2002 To present
Smith & Nephew, Inc.
1450 brooks road Memphis TN, 38116
Attend surgeries, cadaver surgeries, and attend sales training once a year to get a
Knowledge of the latest product and how it is used, and how the surgeon uses the
Latest smith and nephew products.
Using unigraphics version nx5.
Designs, models, and engineering drawings.
Create models for knee and hip departments as well as my department.
In charge of projects from beginning to end.
Communicate with the vendors to make sure the project is done on time.
Created ecr/eco and the models and drawings that would go with it as well.
Created models using sketch in unigraphics.
Worked with all the development groups in recon on various projects.
In charge of the Objet 333 rapid prototype machine and the 6 people that run it.
In charge of scheduling and maintaining the web for the 3d plotter which is
Located in the intranet under http://ortho-intranet/orthopages/recon3dplotter/
Order supplies for the 3d plotter when needed and work with accounts payable
Unigraphics Designer 01/2002 To 03/2002
NILES USA, Farmington Hills, MI 48335
Electrical Component Design
Assemblies layout, detail, and design electrical nsbu switches and connectors for
General Motors front wheel drive and rear wheel drive transmissions
using Unigraphics version 18 (solids and sheet bodies).
Unigraphics Designer 08/2000 To 08/2001
Bosch Corporation, Farmington Hills, MI
Brake Design Assemblies layout, detail, and design fixes on
brake systems for small cars and light duty trucks using
unigraphics version 16 (solids and sheet bodies).
Unigraphics Designer 03/1999 To 08/2000
Trialon Corporation, Warren, MI
GM Tech Center
Layout, assembly drawings, luggage volumes and
seating arrangement drawings (DCS Compliant)
for GM small car (PDM and assembly structure).
Unigraphics Designer 03/1998 To 03/1999
RCO Engineering, Roseville, MI
Detail, layout, and design for structural seating foam
(free form feature and sew and create sheet bodies).
Unigraphics Designer 12/1996 To 03/1998
Gonzales Engineering, Sterling Heights, MI
General Motors Midsize Car
Layout, detail, and design of (modeling and assembly)
underbody welding for General Motors midsize car.
James D. Meadows & Associates, inc., 03/2009
Tolerance Stack-Up Analysis GD&T level- 2
Smith & Nephew training 09/2007
Excel Class 1 And 2
Rockhurst University 08/2005
Business Writing & Grammar Skills
James D. Meadows & Associates, inc., 06/2005
Geometric Dimensioning and Tolerancing - Level 1
Skill Path Seminars 07/2004
How to Become a Better Communicator
Rockhurst University 08/2003
How to write Better and Faster
Health Stream, MEMPHIS, TN 05/2003
Operating Room Protocol
Rockhurst University 11/2002
Business Grammar for Busy Professionals
James D. Meadows & Associates, inc., 09/2002
Geometric Dimensioning and Tolerancing
Unigraphics Custom Design and Modeling
General Motors University, 04/2000
Unigraphics Version 15 Sketcher.
General Motors University, 03/2000
Advanced Assemblies for Unigraphics Version 15.
General Motors University, 12/1999
Unigraphics Version 15 - Basic Assemblies.
General Motors University, 04/1999
Unigraphics Version 15 Upgrade.
General Motors University, 03/1999
GM/PDM Version 4.0.
EDS, Frasier, 03/1996
Unigraphics Basic Modeling and Assemblies.
National Education Center, Eastpoint, MI 1991-1993
Computer Aided Drafting.(2 year technical Diploma)
Lewis and Hanke School of Automotive Technology, 01/1991
Modern Mass Production and Automotive Design.
Lanse Creuse High North, Mount Clemens, MI 06/1989
While I was attending high school, I took a
course of study which involved three years of drafting.
UNIGRAPHICS NX 5,AUTO CAD 2002,PHOTO SHOP, MASK, GEOMAGIC, EDEN OBJET RAPID PROTOTYPE MACHINE
I WORK WELL IN A TEAM ATMOSPHER AS WELL AS ON MY OWN WITH LITTLE TO NO SUPERVISION. I MEET OR BEAT DEADLINES.
Available upon request.
Candidate Contact Information:
|JobSpider.com has chosen not to make contact information available on this page.
Click "Contact Candidate" to send this candidate a response.