Metallurgist - Engineering Resume Search
Metallurgist - Engineering Resume Search
My Spider Scam Awareness Contacting Us F. A. Q.
Job Seekers
Search Jobs
Browse Jobs
Post a Resume
Job Alerts
Search Resumes
Browse Resumes
Post a Job

Metallurgist Resume

Desired Industry: Engineering SpiderID: 36407
Desired Job Location: Jackson, Georgia Date Posted: 4/27/2010
Type of Position: Full-Time Permanent Availability Date: Immediate
Desired Wage: 80000
U.S. Work Authorization: Yes
Job Level: Experienced with over 2 years experience Willing to Travel: Yes, Less Than 25%
Highest Degree Attained: Bachelors Willing to Relocate: Yes

April 2009 to July 2009
Name of the Company : MagPro LLC
Location : Camden, TN 38320
Company is engaged in manufacturing
Magnesium & Magnesium Alloys and
supplying the material to Auto
Industries and Ancellories, who supplies
the parts to aerospace industries.
Worked as a General Laborer, Furnace
Operator, Material Analyst, Quality
Control assistant and Commercial /
Technical Document controller.

July 1979 to August 2008
Name of the Company : Elecon Engineering
Company Limited
Location : Vallabh Vidyanagar, Gujarat,
Company is engaged in manufacturing
Material Handling Equipments, Industrial
Power Reduction Gear Boxes, Stacker
Reclaimer, Loader & Unloader, Conveyors,
Wind Mills for Power Generation.

Positions and Working experience

Senior Manager
2004 to August 2008
Over all in charge of
Heat treatment shop
Metallurgical Quality Control
Inward inspection & Quality Control
Process improvement and implementation
Management system Implementation and
maintenance (ISO 9000 & ISO / IEC 17025)
Initiating budget proposal for Process
equipments, Testing equipments and
required other resources based on future
expansion plan, modernization and
improvement plans.
Vendor Development and Implementing /
educating them for QMS & TQM
Active member of Failure Investigation
and Root Cause Analysis Team
Achievement: Achieve ISO / IEC 17025
certification for Metallurgical Testing
Laboratory and Metrological
(Calibration) Laboratory.
1998 to 2004
Over all in charge of
Heat Treatment shop
Metallurgical Quality Control
In ward, In process, Final stage Quality
Metallic Material Purchasing
Preparing, implementing and maintaining
WPS, WPQ, & PQR for various welding
procedures and welders according to ASME
SEC IX for the entire Group of companies
Achievement: Introduce the methodology
and equipment for Quality control that
reduces time and improve productivity,
reduces human error and physical wear &
tear i.e. human fatigue.
Active member of New Product Development
Process improvement & Process validation
with Product validation
Introduced / replace the frequently
failed material with new material which
withstand the forces and last long the
life, which ultimately prevent the
frequent failure / breakdown of the
equipment on the site, reduced the
breakdown time and part replacement
cost, improved the product image.

Deputy Manager
1988 to 1998
In charge of
Heat treatment shop
Metallurgical Testing Laboratory
Achievement : By introduction of various
latest sensors and process improvements
reduced the process cost by 8 to 12%
along with reduction in process cost by
the new implementation the metallurgical
quality consistency improved such a high
degree that the cost of rejection at
Heat treatment become almost 0 (zero).

Technical Executive
1984 to 1988
Looking after day to day work in the
Heat treatment shop, planning work &
charging of all heat treatment furnaces,
other ancillaries and relevant
equipments. Preventive, repairing and
maintenance of all relevant equipments
in the heat treatment shop.
Achievement: Introduce the advance
planning / commissioning working system,
which has reduced the idle hours /
waiting hours of equipment ultimately
reduced the idle hours and improved the
productivity & utilization of all
equipments by 6 to 8 %.

Junior Engineer / Senior Engineer
1979 to 1984
Worked as a shift supervisor in the heat
treatment shop.
During the period I have been trained
and get knowledge, experience regarding
all relevant equipment i.e. used for
production as well for Quality control
so that I was / am able to operate /
maintain / repair almost all equipment

Degree: Bachelor of Engineering (B.E.)
Branch: Metallurgy
College: Faculty of Technology &
University : Maharaja Sayajirao
University, Vadodara, Gujarat, India.
Year of passing : 1979

Worked as a Management Representative
for ISO 9000 for QMS Implementation and
Also implemented Testing & Calibrating
Laboratory QMS as per IEC / ISO 17025
and worked as a Technical & Quality
Manager for its Implementation and

Available upon request.

Candidate Contact Information: has chosen not to make contact information available on this page.
Click "Contact Candidate" to send this candidate a response.


© 2019 Job Spider
Privacy Policy | CC Marketing Sites | Site Map | Links